The washroom is one of the main rooms of any bathhouse. In the process of arranging this room, the key requirements of construction and finishing technologies and a number of additional nuances must be taken into account: any, even the smallest omission, can subsequently lead to a significant deterioration in the operational characteristics of the room.
Washroom in the bathhouse
Floors deserve special attention in the process of bc data indonesia a washroom. The operating conditions of a washroom are such that the floor here is constantly expos to moisture and frequent temperature changes, which must be taken into account in the process of designing the structure and its subsequent construction.
Shower in the bathhouse
Requirements for the floor in the washroom
In order for the floor in the washroom to serve as pet products market report and efficiently as possible, it must meet the following requirements:
- facilitate rapid and effective drainage of moisture. For this purpose, floors are usually made with a slight slope towards the drain hole or are arrang using flowing technology;
- be fully ventilat and dry quickly;
- withstand operation in conditions of high humidity and temperature changes;
- be laid in such a way as to prevent the possibility of drafts appearing in the room.
Main types of floors for the washroom
The most widely us structures in private construction are wooden (further classifi as leaky and non-leaking) and concrete structures.
Leaking wood floors
Leaking floor in the bathhouse
The singapore lead option. On a pre-prepar base (bottom crown, concrete base, support pillars, etc.) logs are fix, which serve as a base for the subsequent placement of the plank flooring.
Leaking wood floors
The boards are laid with gaps of 3-5 mm – through them, water will be freely drain from the washroom.
Leaking wooden floors, device
As a rule, such floors are made disassemblable, which allows, if necessary, to remove the boards and take them out of the room for better drying.
This method is budget-friendly and easy to implement, but it has a significant drawback: it is impossible to insulate this type of floor.
In the case of leaking wooden floors, the structure can be built without observing the slope: the water will go into the gaps between the flooring elements, and then into the ground under the bathhouse.
Draining water from a bathhouse with a leaking floor
Non-leaking wood floors
Washroom in the bathhouse, wooden floor
The boards are laid without gaps. The possibility of dismantling such a floor is not provid.
Non-leaking wood floors
The system is install with a slope towards the drain hole – through it, water will flow into the water collector, and then through a pipe it will be divert outside the building.
The structure includes a “black floor” and a heat-insulating layer.
When arranging a leak-proof floor structure, special attention should be paid to the issue of ventilation of the underground space. As a rule, to ensure sufficient ventilation, a hole (or several, depending on the area of the room) is made in the floor and a plastic pipe is insert into it. Pipes with a diameter of 50 or 100 mm are optimal.
Example of floor ventilation in a bathhouse
Concrete floors
Shower in the bathhouse, leak-proof floor
A relatively simple to install, durable, reliable and easy-to-maintain structure. In practice, pouring a concrete floor often requires much more modest financial investments compar to erecting a wooden structure.
The concrete floor has only one drawback – it is cold. There are several options for solving the problem:
- wear flip-flops;
- insulate the floor well. The most popular option;
- install a floor heating system. Requires significant financial investments and the involvement of third-party specialists if the private developer does not have the appropriate skills.
The procure for installing a wooden floor in a washroom
The procure for installing a wooden floor consists of several main stages. First, the base is prepar, then the flooring is install (the technology is slightly different for leaking and non-leaking floors), and then ventilation issues are resolv.
Laying a wooden floor begins with installing the joists. Larch or pine beams are usually us. If possible, the flooring should be made of boards made from the same material as the joists. As not, floors are install with a slope towards the drain hole (in the case of a leaking structure, this rule can be ignor).
The installation of the joists is carri out according to the width of the room, i.e. the smallest distance between opposite walls. If the room is square (for example, 4×4, 6×6, etc.), the installation of the joists can be carri out in any direction.
Floor joists
Important note! The joists are mount transversely to the drain.
For greater ease of perception, the information is divid into several steps, support by illustrations and diagrams and present in a table format.